Cost-effective Desk Reflow Oven utilizes forced air convection heating technology and PC software interface to make an accurate temperature profile quickly and easily. T200N+ is a fine temperature profile model with temp testing capable of lead-free soldering.
1. PC interface software control and visional operation
2. Real-time temperature testing function fills the blank of SMT industry overall world for adjusting the temperature at the real time.
3. Patented heater installation® for heating evenly
4. Patented forced air cycling and ventilating technology® for extremely uniform temperature profiling across the board.
5. Patented oven door actuating device® for no vibration after PCB welding.
6. Patented auto-open door technology® for higher efficiency on production and the door matched with seal device for keeping temperature.
7. Active Ventilation function for exhaust gas emission.
8. Exhaust purifying function for environment-friendly.
9. Nitrogen inert and N2 saving design.
|Temperature control segment||40 segment,|
The segment can be set in computer according to the actual requirement.
|Temperature-zone numbers||Single-zone and multi-segment|
|Temperature control system||PC control system ,SSR non-contact output|
|Temperature accuracy||± 2 ºC|
|Temperature range||Room-temperature -360ºC|
|Heating supply||Infrared ray + Hot air convection|
|Effective working table area||270mm * 230mm (less than A4)|
|Welding time||3min ± 1min|
|Temperature curve||It can be set ,adjusted and tested according to the actual requirement .|
|Cooling system||Transverse flow equal cooling|
|Rated voltage||AC single-phase, 220V; 50Hz|
|Dimension||L * W * H 820′ 460 ′ 310mm|