- Overview
- Product Description
- Detailed Photos
- Trade Detail
- Guarantee
- Company Profile
- Factory
Basic Info.
Product Description
| Application scenarios | automotive fuel tanks, engineering machinery fuel tanks, agricultural machinery fuel tanks, generator fuel tanks, chemical tanks, automotive modification, yachts, water tanks, recreational vehicles |
| Head&flange | SAE05 standard 5-hole, engineering plastic injection molding, transparent plastic cover (PC) |
| Main material | stainless steel 304 steel pipe |
| Float material | NBR (optional stainless steel 304) |
| Wire length | Standard 460mm (customizable), 3-wire |
| Signal output | Voltage (0-5VDC or 0.5-4.5VDC) Current (4-20mA) |
| Display | 0-100%, or actual number of liters of liquid remaining in the box (needs to be calibrated before leaving the factory) |
| Accuracy | Standard 21mm (customizable for 5mm, 10mm, 35mm) |
| Standard accessories | 2mm NBR gasket * 1, M5 * 16 screws * 5 |
| Other optional features | alarm - low level alarm, high level alarm; Waterproof and dustproof connectors |
Use of good anti-corrosion materials, 5-layer waterproof structure IP68
Stainless steel housing
Uses 316L stainless steel housing and diaphragm
Imported silicon sensor
Adopt imported MEAS TE diffusion silicon sensor
WARRANTY PERIOD
The warranty period of the product is twelve (12) months.
SCOPE OF WARRANTY
The company guarantees that the product is free of any material and manufacturing defects during the warranty period. If the product fails under normal use during the warranty period, it is natural damage (non-human factor damage), the company's product or the company's agent product enjoys free replacement of new products or good products, a component repair or replacement during the warranty period Repair service.
Free maintenance of the product warranty period. The warranty period of parts and accessories that have been replaced by our company will not be extended due to free maintenance. During the warranty period, if the fault cannot be repaired due to the shortage of product parts, or the product is discontinued or out of stock, the company can replace the models with the same specification or higher level after the customer agrees to replace, and the price difference will be charged at the discretion of the customer.
2020 opened R&D and manufacturing line for liquid lever senor and Mechanical Guages for surpport aftermarket replacement
As experienced professionals, we served over 104 satisfied customers and partners around the world with products, solutions and service
