Gma-TCP Series Posital Baumer P+F Equivalent Replacement Modbus TCP Ethernet Multi-Turn Absolute Encoder

GMA-TCP Series

Housing Diameter: 58mm;
Solid Shaft:10mm;
Interface: Modbus TCP;
Number of the absolute ascertainable revolutions: 8192ppr(13Bits)         
Total number of turns:4096(12bits)
Supply Voltage:8-29v;
Output Code: Binary;
Widely used in various fields of automatic control and measurement system,such as machinery manufacturing, shipping, textile, printing, aviation, industry Testing machine, elevator, etc.
Vibration-resistant, corrosion-resistant, pollution-resistant;

Connection Leading:
Signal	8-30v	GND	Txd+	Txd-	Rxd+	Rxd-
Pin	POWER-1	POWER-3	IN-1	IN-3	IN-2	IN-4
Connector	M12-A/ 4 Pins Male -1	M12-A/4 Pins Male -3	M12-D/4 Pins Female -1	M12-D 4 Pins Female -3	M12-D 4 Pins Female -2	M12-D 4 Pins Female -4
	M12-A Male Connector		M12-D female Connector

Instructions
Encoder default IP: 192.168.0.200
Default netmask: 255.255.255.0
Default Gateway: 192. 168.0. 1
Port number: 502

Note:
 Adopt elastic soft connection shall be applied between encoder shaft and output shaft of user end to avoid damage of encoder shaft system due to serial movement and run out of user shaft.
 Please pay attention to the allowable axle load during installation.
 Make Sure that the difference Between Axial Degree of encoder shaft and user output shaft shall be no more than 0.20mm, and the deviation angle with axis shall be less than 1.5 ° .
 Try to avoid knocking and falling collision during installation;
 Do not connect the power line and the ground wire in reverse.
 The GND wire shall be as thick as possible, generally larger than φ 3.
 Output lines of encoder shall not be overlapped with each other to avoid damaging output circuit.
 Signal line of encoder shall not be connected to DC power supply or AC current to avoid damaging output circuit.
 The motor and other equipment connected to the encoder shall be well grounded without static electricity.
 Shielded cable shall be used for wiring.
 Before starting the machine, carefully check whether the wiring is correct.
 During long-distance transmission, the signal attenuation factor shall be considered, and the output mode with low output impedance and strong anti-interference ability shall be selected.
 Avoid using in strong electromagnetic wave environment.
 

GERTECH is an technical enterprise Located in Weihai City ShanDong Province, China, has been providing Professional Industrial Automation Sensors Solutions for hundreds of enterprises all over the world since 2004. We offer the world's broadest range of encoders for motion feedback control. For 17 years, Gertech have been providing innovative, customized system solutions for virtually any heavy-duty, industrial, servo- or light-duty application,and is committed to our people, customers and community and strives for excellence in safety, quality, delivery and customer service.

Gertech Manufactures and supplies safety systems for the door and gate market. The product portfolio includes optical and pneumatic sensing edges, bumpers, and photo-eye sensors which meet international standards for safety devices. These products have applications in commercial, bus, and train doors as well as production machines.
Our Main Products: A. Incremental Encoder; B. Programmable Incremental Encoder; C. Single-turn and multi-turn Absolute Encoder with Parallel, SSI, Modbus, Profibus, Canopen, Profinet, DeviceNet and EtherCaAT interfaceS; D. Draw Wire Encoder; E. Manual Pulse Generator; F. Optical Encoder Kit; G. Servo motor encoder;
Certificates: CE,ROHS,ISO9001,ETC.

Gertech Sensors are widely applied in the textile machinery, hoisting cranes, CNC machine, experimental machine, satellite communication, electric cars, water conservancy project, nuclear power equipment, High-speed railway, mobile equipment, wind power generation, packaging and printing machine, lifting equipment, aeronautical and space industry, Iron and steel reinforcement manufacturing equipment, port machinery, health communications and many other fields in advanced manufacturing industries, automatic assembly line and so on.

About Delivery:
Leading time: Delivery can be within a week after full payment by DHL or other logics as per requested; 

About Payment:
Payment can be made through bank transfer, west union;
Quality Control:
Professional and experienced quality inspection team leaded by Mr. Hu, can ensure the quality of each product when it leaves the factory.Mr. Hu has more than 10 years experience in the industries of encoders,
About technique support:
Professional and experienced technique team leaded by Doctor Zhang, has accomplished  many breakthroughs in the development of encoders, apart from normal incremental encoders, Gertech now has finished Profinet, EtherCAT, Modbus-TCP and Powe-rlink development;
About Inquiry:
Any inquiry will be replied within 24 hours, and customer also can add what's app or wechat for Instant messaging, our marketing team and technical team will offer professional service and suggestion;
Guarantee policy:
Gertech offers 1year warranty and life-long technical support;
We're here to help. Our engineers and encoder experts will respond quickly to your toughest, most technical encoder questions.